Go to http://www.amit.com.tw/download/firmware/ read ANB194a.TXT then
ANB194a.EXE the EXE file should also be able to find your NAT to
recover it. Good luck!
Henryts77@no-spam (Henry) wrote in message news:<35b2efce.0306201250.66fe9ae4@no-spam>...
> I have a 3-COM Home Ethernet
> Gateway model 3C510 that has been discontinued by 3-Com. I have had
> this for a while and finally got around to
> installing it and it worked fairly well except that it was dropping
> connection. So I went to the 3com website and downloaded the firmware
> upgrades. Usually firmware upgrades are done in sequence so I flashed
> 1.95 and
> it worked fine,I flashed 1.97 and it worked and then I flashed 1.98
> and now
> the status light flashes at high speed and I have a dead unit. There
> was no
> power outage during the flash so I am not sure what happened. I tried
> that upgrade program they gave on there site
> to bring it back to the original firmware but now it says either it
> can't
> find the unit or another error something about a send error . I have
> tried
> the shorting of pins 3 and 8 to reset it to no avail. Is there
> anything
> else I can try or am I SOL ??? I realize the firmware update was as-is
> but to download a firmware update that trashes your unit from the
> companies own website stinks. Any info would be appreciated.